Tuesday, October 16, 2018

Digital Power Electronics and Applications Academic Press




The purpose of this book is to provide a theory of Digital Power Electronics and its applications. It is well organized in 400 pages and over 300 diagrams. Traditionally,Power Electronics is analyzed by the analog control theory. For over a century, people have enjoyed analog control in Power Electronics, and good results in the analog control and its applications in Power Electronics mislead people into an incorrect conclusion that Power Electronics must be in analog control scheme. The mature control results allowed people to think that Power Electronics is a sunset knowledge. We would like to change these incorrect conclusions, and confer new life onto the traditional Power Electronics. In this book the authors initially introduce the digital control theory applied to Power Electronics, which is completely different from the traditional control scheme.

Digital Electronics 1 Combinational Logic Circuits | Tertulien Ndjountche




This book discusses all the different aspects of digital electronics, using a descriptive approach combined with a gradual, detailed and comprehensive presentation of basic concepts. The principles of combination and sequential logic are presented, as well as the underlying techniques to the analysis and design of digital circuits. The analysis and design of digital circuits with increasing complexity is facilitated by the use of abstractions at the circuit and architecture levels.

Carbon Based Electronics Transistors And Interconnects At The Nanoscale | Ashok Srivastava, Ashwani Sharma, Jose Mauricio Marulanda, and Yao Xu




This book can serve as a textbook for graduate-level course in nano electronics for students in electrical and electronics engineering, applied physics, and materials science with focus on reduced-dimension materials such as carbon nanotubes. The material covered in the book will be very useful for graduate students for thesis and dissertation research exploring the integration of carbon nanotubes as interconnects with sub-nanometer CMOS technology nodes, high-frequency and high-speed electronics, carbon nanotube field-effect transistor sensor electronics, and numerous other applications. The book will be very useful for practicing engineers in the field of VLSI design and technology, semiconductors, nanoscience and nanotechnology, and microelectronics.

Arduino Programming with .NET and Sketch | Agus Kurniawan

Arduino is a board development platform with which we can develop an embedded application with several sensor and actuator devices. Arduino is an open source-based hardware. There are many Arduino models that you can use to develop. This book is designed for developers (especially for .NET developers) that want to build Arduino programs for general and specific purposes. This book assumes you may have previous programming experience. The book is also written for someone who may have developed programs using .NET and wants to develop an embedded program with Arduino boards.This book is designed with a step-by-step approach. You will learn how to build Arduino programs using sketch and .NET, and explore Arduino capabilities such as digital and analog I/O processing, serial communication, SPI, and I2C bus.

Advances in Power Electronics and Instrumentation Engineering

The mission of the PEIE International Conference is to bring together innovative academics and industrial experts in the field of power electronics, communication engineering, instrumentation engineering, digital electronics, electrical power engineering, electrical machines to a common forum, where a constructive dialog on theoretical concepts, practical ideas and results of the state of the art can be developed. In addition, the participants of the symposium have a chance to hear from renowned keynote speakers

Electronic Devices and Circuit Theory 7th Edition | Robert L Boylestad and Louis Nashelsky

It is now some 50 years since the first transistor was introduced on December 23,1947 For those of us who experienced the change from glass envelope tubes to the solid-state era, it still seems like a few short years ago. The first edition of this text contained heavy coverage of tubes, with succeeding editions involving the important decision of how much coverage should be dedicated to tubes and how much to semiconductor devices.It no longer seems valid to mention tubes at all or to compare the advantages of one over the other—we are firmly in the solid-state era.

Electronic Devices and Amplifier Circuits | Steven T Karris

This book is an undergraduate level textbook presenting a thorough discussion of state-of-the art electronic devices. It is self-contained; it begins with an introduction to solid state semiconductor devices. The prerequisites for this text are first year calculus and physics, and a two-semester course in circuit analysis including the fundamental theorems and the Laplace transformation.

Electronic Communication 2nd Edition

This book is intended to be used as supplement any book covering electronic communication. The pre-requisite of using this book include basic course in D.C. and A.C.theory as well as a complete course covering theory and operation of electronic devices. This book prove extremely for students enrolled in electronic communications course in a two years technical college and it should also be quite helpful for students in a four year electronic engineering program.

Electronic Commerce Principles and Practice | Hossein Bidgoli

To build an e-business or establish a Web presence, several key issues must be analysed, including the various e-commerce models and the key technologies and applications, and this book does just that. This book should interest students majoring in business, economics, information systems, and computer science, as well as managers and executives in many service industries, such as marketing, real estate, banking, and health care. Managers and administrators in government and public organizations will also find this book a practical guide for designing and managing e-commerce applications.

Electronic Circuits Fundamentals and Applications Routledge | Tooley Michael

The book is ideal for people who are studying electronics for the first time at any level, including a wide range of school and college courses. It is equally well suited to those who may be returning to study or who may be studying independently as well as those who may need a quick refresher.The book has 19 chapters, each dealing with a particular topic, and ten appendices containing useful information. The approach is topic-based rather than syllabus-based and each major topic looks at a particular application of electronics. The relevant theory is introduced on a progressive basis and delivered in manageable chunks.

Electronic and Optoelectronic Properties of Semiconductor Structures

Electronic and Optoelectronic Properties of Semiconductor Structures presents the underlying physics behind devices that drive today’s technologies. The book covers important details of structural properties, band structure,transport, optical and magnetic properties of semiconductor structures. Effects of low-dimensional physics and strain – two important driving forces in modern device technology – are also discussed. In addition to conventional semiconductor physics, the book discusses self-assembled structures, mesoscopic structures and the developing field of spintronics.The book utilizes carefully chosen solved examples to convey important concepts and has over 250 figures and 200 homework exercises. Real-world applications are highlighted throughout the book, stressing the links between physical principles and actual devices. Electronic and Opto electronic Properties of Semiconductor Structures provides engineering and physics students and practitioners with complete and coherent coverage of key modern semiconductor concepts. A solutions manual and set of view graphs for use in lectures is available for instructors.

Electronic and Electrical Servicing Consumer and Commercial Electronics Second Edition | Ian Sinclair and John Dunton

This new edition of Electronic and Electrical Servicing reflects the rapid changes that are taking place within the electronics industry. In particular,we have to recognize that much of the equipment that requires servicing will be of older design and construction; by contrast, some modern equipment may require to be replaced under guarantee rather than be serviced.We also need to bear in mind that servicing some older equipment may be totally uneconomical, because it will cost more than replacement. With all this in mind, this new edition still provides information on older techniques,but also indicates how modern digital systems work and to what extent they can be serviced.

Electrical and Electronics Measurements and Instrumentation | Prithwiraj Purkait

This book can be used as a textbook for the course in electrical and electronics Measurements and instrumentation. It presents a comprehensive treatment of the subject of electrical  and electronics measurements and instrumentation as  taught to the Undergraduate students of B.Tech/BE in Electrical Engineering, Electrical and Electronics Engineering, Instrumentation Engineering, and allied branches. The book thus aims at maintaining balance between these diverse fields of engineering disciplines by drawing Examples from various applications. The prerequisite on the part of the reader is that he or She should have had introductory courses on linear algebra, basic calculus, vector/phasor analysis, transform theory, circuit analysis and elementary mechanics. For the students ‘interest, appendices on number systems and unit conversions are added at the  end.

Electrical and Electronic Principles and Technology 5th Edition | John Bird

Electrical and Electronic Principles and Technology 5th Edition introduces the principles which describe the operation of d.c. and a.c. circuits, covering both steady and transient states, and applies these principles to filter networks, operational amplifiers, three-phase supplies,transformers, d.c. machines and three-phase induction motors.

DTV the Revolution in Digital Video Jerry Whitaker

“Of the future industries now visible on the horizon, television has gripped the public imagination most firmly. To bring television to the perfection needed for public service, our work proceeds under high pressure at great cost and with encouraging technical results.” “Such experiments call for … imagination of the highest order and for the courage to follow where that imagination leads.It is in this spirit that our laboratories and our scientists Are diligently and devotedly engaged in a task of the highest service to humanity.”From such work television was born, and today, the same genius and dedication in the service of mankind gave birth to the Advanced Television Systems Committee (ATSC) digital television (DTV) and high-definition television (HDTV) standard.

Digital Signal Processing Tutorial

Anything that carries information can be called as signal. It can also be defined as a physical quantity that varies with time, temperature, pressure or with any independent variables such as speech signal or video signal.The process of operation in which the characteristics of a signal (Amplitude, shape, phase,frequency, etc.) undergoes a change is known as signal processing.Any unwanted signal interfering with the main signal is termed as noise. So, noise is also a signal but unwanted.

Digital Electronics Principles Devices and Applications | Anil K. Maini

Digital Electronics: Principles, Devices and Applications is a comprehensive book covering, in one volume, both the fundamentals of digital electronics and the applications of digital devices and integrated circuits. It is different from similar books on the subject in more than one way. Each chapter in the book, whether it is related to operational fundamentals or applications, is amply illustrated with diagrams and design examples. In addition, the book covers several new topics, which are of relevance to any one having an interest in digital electronics and not covered in the books already in print on the subject. These include digital troubleshooting, digital instrumentation, programmable logic devices, microprocessors and micro-controllers. While the book covers in entirety what is required by undergraduate and graduate level students of engineering in electrical, electronics, computer science and information technology disciplines, it is intended to be a very useful reference book for professionals,R&D scientists and students at post graduate level.

Digital Electronics 3 Finite State Machines | Tertulien Ndjountche

The omnipresence of electronic devices in everyday life is accompanied by the size reduction and the ever-increasing complexity of digital circuits. This comprehensive and easy-to-understand book deals with the basic principles of digital electronics and allows the reader to grasp the subtleties of digital circuits, from logic gates to finite state machines. It presents all the aspects related to combination logic and sequential logic. It introduces techniques to establish logic equations in a simple and concise manner, as well as methods for the analysis and design of digital circuits. Emphasis has been especially laid on design approaches that can be used to ensure a reliable operation of finite state machines. Various programmable logic circuit structures by practical examples and well-designed exercises with worked solutions.

Designing Audio Power Amplifiers | Bob Cordell




Designing Audio Power Amplifiers is written to address many advanced topics and important design subtleties. At the same time, however, it has enough introductory and tutorial coverage to allow designers relatively new to the field to absorb the material of the book without being overwhelmed. To this end, the book starts off at a relaxing pace that helps the reader develop an intuitive feel and understanding for amplifier design.Although this book covers advanced subjects, highly involved mathematics is kept to a minimum—much of that is left to the academics. Design choices and decisions are explained and analyzed.

Cost analysis of electronics systems 2nd edition

This book is an outgrowth of a course on Electronic Product and System Cost Analysis developed at the University of Maryland. Since 1999, the course has been taught as a one-semester graduate course (populated with a mix of senior-level undergraduates and graduate students) and many times in the form of an industry short course.

Complete Electronics Self Teaching Guide with Projects | Earl Boysen and Harry Kybett

Complete Electronics Self-Teaching Guide with Projects is for anyone who has a basic Understanding of electronics concepts and wants to understand the operation of components found in the most common discrete circuits. The chapters focus on circuits that are the building blocks for many common electronic devices, and on the very few (but important) principles, you need to know to work with electronics.

Communications Radar and Electronic Warfare | Adrian Graham

This book looks at the subjects of radio communications, radar and electronic warfare.The aim is to provide the reader with a mixture of theory and practical illustrations to explain the way in which these systems are used in practice. The book is aimed at operators, designers and managers operating in these areas. It is designed to provide a detailed overview at a level suitable for this audience. This means that the intention has been to provide explanation of complex theory in as simple manner as possible, and to link the theory to real life as far as possible. One of the main reasons for writing the book is that there is a large body of very in-depth, complex works that are beyond the grasp of the average reader. There are also works that provide simple overviews but without introducing the necessary background theory. Hopefully, this book provides a middle way between these two extremes.

Commercial Wireless Circuits and Components Handbook | Mike Golio

The purpose of the CRC Commercial Wireless Circuits and Components Handbook is to provide single volume comprehensive coverage of microwave and wireless circuit design. It is intended to be a starting point for any project involving design, development, or acquisition of RF or microwave circuitry. The articles that comprise the handbook provide important information for practicing engineers in industry, government, and academia.  The intended audience also includes microwave and other electrical engineers requiring information outside of their area of expertise as well as managers, marketers, and technical support workers who need better understanding of the fields driving their decisions.

Building a Home Security System with Arduino | Jorge R. Castro

The Arduino Uno is an open source micro-controller built on a single circuit board that is capable of receiving sensory input from the environment and controlling interactive Physical objects. In addition, a development environment allows writing software for the board in the Arduino programming language. It is used for a variety of different  purposes and projects, from simple projects such as building a thermostat, to more advanced ones Such as robotics, Web servers, seismographs, home security systems, and synthesizers. This book will demonstrate how Arduino Uno can be used to develop a highly connected home security system by mobilizing a network of sensors, which can feed alerts back to an Arduino Uno when alarms are triggered.

Basic Electronics Theory and Practice | Sean Westcott and Jean Riescher Westcott

The hobbyist field changed as the electronics advanced the increasing sophistication and miniaturization of electronics components and the products built with them made hobbyist build electronics pale in comparison to their flashier, mass produced competition.

Audio Electronics 2nd Edition | John Linsley Hood

The progress of audio towards the still distant goal of perfect imitation of reality has been and remains inextricably bound up with the development of electronic component and circuit technology and with the parallel progress in various transducers and interface devices used to generate and reproduce electrical signals.However,while in the early years of audio almost all the development work was done in empirical manner, with ideas being tested experimentally in studios or listening rooms of those involved-for what of any better way of advancing the design technology gradually as our understanding of technical problems and their solutions increased, the way in which the designer make their design has become increasing analytical and theoretical in its nature.

Audio Amplifier Design Handbook

The design of power amplifiers exerts a deep fascination all of its own in both amateur and professional circles. The job they do is essentially simple, but making a reliable high-performance circuit to do it well is surprisingly difficult, and involves delving into all kinds of byways of electronics. Perhaps this paradox is at the root of the enduring interest they generate. Reliable information on power amplifier design is hard to find, but in this book

Arduino Electronics Blueprints

The Arduino Electronics Blueprints book was written to address the concerns mentioned in a user friendly and educational format. Every chapter in the book starts off with either a historical reference to electronic discoveries or a brief discussion of present technologies used in contemporary consumer, entertainment, or industrial products.The book was designed to show how to build awesome electronic devices using parts found in laboratory bins or junk boxes. Also, new prototyping materials such as little Bits electronic modules and Elenco SNAP circuit kits are introduced to readers as well. The new and exciting prototyping materials presented allow us to rapidly build the target Arduino device discussed in some of the book’s chapters. To aid readers in building the fun Arduino projects, a Parts list of electronic components is included in each chapter of the book.

ArduFarmBot Tomato garden automation with help of Internet of Things IoT

Our generation grew up from a science fiction world perspective, packed with cartoons and so many series that sowed in our unconscious this reality that we would live in the future.What we see today is not very different from what we dreamed as children – things communicate with each other and interact with their owners which already has a name:”IoT – Internet of Things”!Objectively it will allow (already allows) an interconnection of real world objects with the virtual world through sensors. Exchanging information about status, location,operation, problems, decisions, etc., where algorithms will be responsible for processing that information, responding to the object, and generating a large amount of data that will be stored on powerful servers in the cloud. And if you want, everyone can interact with your world.

Analog Electronics Applications Fundamentals of Design and Analysis | Hernando Lautaro Fernandez-Canque

The book is written to cover material for the first 2 years of an electrical and electronic engineering university degree. The book is also beneficial for all the years of a technician grade study and it can be used by students of science related degrees at any level to acquire acknowledge in analog electronics. Some courses may, if appropriate, ignore the material on semiconductor physics and concentrate on the external characteristics of semiconductor devices. Students of electronics or electrical engineering will need to study the physics-related material but students of other disciplines may find it more appropriate to omit these sections.

Analog and Digital Signal Processing | Ashok Ambardar

This book on analog and digital signal processing is intended to serve both as a text for students and as a source of basic reference for professionals across various disciplines. As a text, it is geared to junior/senior electrical engineering students and details the material covered in a typical undergraduate curriculum. As a reference, it attempts to provide a broader perspective by introducing additional special topics towards the later stages of each chapter. Complementing this text, but deliberately not integrated into it, is a set of powerful software routines (running under Matlab) that can be used not only for reinforcing and visualizing concepts but also for problem solving and advanced design.

Analog and Digital Electronics | Daniel Adam Steck

Analog system designers many times in the past avoided the use of electronics for their system functions because electronic circuits could not provide the dynamic range of the signal without severe non-linearity, or because the circuits drifted or became unstable with temperature, or because the computations using analog signals were quite inaccurate.

Analog And Digital Circuits For Electronic Control System Applications By Jerry Luecke

Analog system designers many times in the past avoided the use of electronics for their system functions because electronic circuits could not provide the dynamic range of the signal without severe non-linearity, or because the circuits drifted or became unstable with temperature, or because the computations using analog signals were quite inaccurate. As a result, the design shifted to other disciplines, for example, mechanical.

Alternative Energy in Power Electronics

Electric power generated from renewable energy sources is getting increasing attention and supports for new initiatives and developments in order to meet the increased energy demands around the world. The availability of computer–based advanced control techniques along with the advancement in the high-power processing capabilities is opening new opportunity for the development,applications and management of energy and electric power. Power Electronics is integral part of the power processing and delivery from the energy sources to the utility supply and the electricity consumers.

Advances in High Performance Motion Control of Mechatronic Systems | Takashi Yamaguchi and Mitsuo Hirata and Chee Khiang Pang

Mechatronic systems—the synergetic integration of mechanical, electrical,computational, and control systems—have pervaded consumer products ranging from large-scale braking systems in vehicular agents to small-scale integrated sensors in portable mobile phones. To boost sales and increase revenue in competitive consumer electronics industries, continuous improvements in servo evaluation and position control of mechatronic systems are essential.The subject of this book is advanced control topics for mechatronic applications,and in particular, control systems design for ultra-fast and ultra-precise positioning of mechanical actuators in mechatronic systems.

Advanced Power Electronics Converters PWM Converters Processing AC Voltages

This book deals with a new methodology to present an important class of electrical devices, that is, power electronics converters. The common approach to teaching converters is to consider each type individually, in a separate and isolated fashion.The direct consequence is that the learning process becomes passive since the power electronics configurations are presented without consideration of their origin and development. Since the teaching process is based on the topology itself, students do not develop the ability to construct new topological from the conventional ones.

Advanced Digital  Electronics

It is sincerely hoped that this volume as well as the other volumes in this series, the instructor’s data books, and the other supplementary materials will make the study of technology interesting and rewarding for both students and teachers.

Advanced DC DC Converters Second Edition

The purpose of this book is to provide up-to-date information on advanced DC/DC Converters that is both concise and useful for engineering students and practicing professionals.It is well organized in 748 pages with 320 diagrams to introduce more than 100 topological of the advanced DC/DC converters originally developed by the authors.EMI/EMC reduction and various DC voltage sources are also illustrated in this book.All prototypes represent novel approaches and great contributions to modern power engineering.

270 Mini Electronics Project with Circuit Diagram




This Book is written for all the people who love innovation. It is the big collection of ideas to do some innovative project, to make something new. I believe this Book will be helpful for the students for their mini project. Our effort will get success if you get any help like project idea,circuit diagram help from this book.